Posted by Ash
This post may contain affiliate links to products we personally use and love.
Our front porch was begging for an update.
Eileen was determined to rid the porch of that 1980s blue since the day we moved in.
She was a teacher at the time, and on her first afternoon of summer, she was out painting the porch white.
Here's a close-up of the blue she detested:
As you can see in the below picture, the white made such a difference.
In addition to painting the porch, Eileen also painted the cabinet that housed the electric meter and Fios box.
Before it was blue - so it drew your attention - yet, she painted it a creamy white color to make it blend in more.
It was only about a day’s work, and it looked great.
As the years went on, we wanted to liven up the front of our home even more. We thought a little more privacy would be nice too, so we decided to enclose the porch with a railing.
Eileen was pregnant at the time, so she would often walk around the neighborhood with Zeus. During their walks, she made it her mission to look at other styles of porch railings, deciding what she liked and how to make it work for our home.
Eventually we settled on a look and height that we thought would work well with our home.
I considered two approaches to building the porch railings. The first was prefabricated railings sold at Home Depot. These were 6 ft painted railing segments, ready to bolt onto the posts. They would be the fastest way to get railings installed.
The second approach was buying the individual railing posts and handrails and constructing the segments myself.
I decided against the first method. Buying in increments of 6 ft meant a chunk of the prefabs would be wasted when fitted on our home.
Building the segments myself meant I could fine tune the cost to exactly the dimensions allowed by our porch, and this method yielded the cheapest outcome.
The downside was that more labor would be involved, but I was never the one to back down from some good old hard work.
I measured the distances between my porch posts then off we went to Home Depot. We putzed around looking at railing posts and found a style we liked.
Then we looked at the handrails. We technically could have just gone with a 2 x 4 for the handrail, but we wanted a little more pizzazz.
Ultimately, we went with a handrail with some decorated grooves, and it came with slots for the rail posts, eliminating the need for me to space the posts out myself.
Before leaving the store, I picked up some galvanized L brackets to attach the handrails to the porch posts, and some 2 x 4s to serve as a base for the railings.
The next step in the project was to construct 3 railing segments. Two of the longer segments faced the street, while a short segment on the side connected the masonry wall to the end post.
Construction was fairly simple. I used exterior deck screws to attach the handrail to the railing posts, and the pre-cut slots in the handrail on the individual posts definitely sped things up.
I actually constructed the segments in the living room while we were catching up on our shows. See picture below:
Now it was time to attach the segments to the porch posts.
I cut some 2 x 4 squares to serve as “feet” for the segments. These feet were attached to the bottom of each porch post, and the segments would rest on them.
This foundation felt a lot more sturdy than simply using L brackets to mount the segments.
See picture below (ignore the fact that the railings are already painted).
The two longer railing segments installed quickly to the porch posts. The bottoms were secured to the 2 x 4 feet, and the handrails were secured using L brackets to the porch posts.
However, the short side segment took a little more time due to a wood-to-brick mount required.
My solution was to bolt a piece of 2 x 4 to the brick wall and attach the railing segment to that. It would act just like the opposite end of the segment where the porch post was.
My first attempt at attaching the 2 x 4 to the wall failed.
I had tried using masonry nails but they started chipping the sides of the bricks. Then I remembered the very first drill I bought was a hammer drill!
When I bought this drill, I didn’t really know what the ‘hammer’ part meant. I was naive at the time, and it sounded cool and looked awesome. So I had bought the largest drill in the store.
Of course, now, I am wiser and know that hammer drills (when the hammer mode is engaged) repeatedly, driving the bit back and forth against the surface to help penetrate really tough surfaces like masonry.
Unfortunately, I did not have any masonry bits so had to run back out to Home Depot to pick some up. Regular wood bits would fail pitifully against a hard surface like brick.
I was excited to try out my hammer drill for its actual purpose. All these years I’d been using it (very inconveniently due to its enormous size) as a regular wood drill. I got back home with my new masonry bits and pounded away at the wall.
It sounded like a jackhammer, but it got the job done very neatly and quickly. I bored some holes through the 2 x 4 straight into the wall, and used some screws to make a secure connection.
Now I had a wooden mounting point for the railing segment. One minor task remained, and that was to drill out a small hole at the bottom edge of the 2 x 4 mount for some existing coaxial cable to run through.
Here’s a side picture showing where I needed to mount the shorter railing segment between a porch post and the masonry wall:
The last step of the project was the painting. This was actually the most labor intensive part. I had to paint each individual railing post and it felt like it took forever with a brush.
Eileen normally does all of the painting on our projects, and since she was pregnant, I had to do it myself.
It would have went so quickly with a paint sprayer, but I did not have one of those.
Slowly though, the final picture started to take shape. I even repainted all the porch posts to make them pop with the railings.
Here’s a picture of the mounted rail segments being painted:
The porch rails were finally done and they looked great. Our home got a nice upgrade - some sweet curb appeal.
Not only did the porch railings enhance the aesthetics, but they were also very functional.
We started spending a lot more time on the porch, as the railings gave us a little more privacy and also served as a wonderful enclosure for our dog Zeus.
We simply sat at the open end, and he was free to run back and forth within the confines of the porch.
Below are some pictures of the finished project:
The total cost of the project was only $150, and it took me a weekend of work.
Here's a before and after of the whole project. We were thrilled with how nice it looked, and so was our realtor when the time came to put the house on the market.
Check out how we sold our house in less than a week! I think the porch railings helped :)
Want to see more? Check out our similar projects.
Hi! We're Ash and Eileen, and we are sharing our home project stories with you. From crafty projects to home maintenance to more ambitious DIY endeavors, we hope our stories inspire you to check a few things off your project list! :)