Archives for February 2017

Making a Crafty Mr. Potato Head for St. Patrick’s Day

February 28, 2017 by Eileen 14 Comments

My little guy loves craft time with his mama.

But, I might love it just a little more.

I love watching his creativity, his little mind at work, as he comes up with new ways of doing things.

We have a sweet little set-up in my office, where he has a craft table beside my desk. On his table, he has a bin of art supplies that he’s allowed to use whenever (crayons, markers, and paper).

He also has a drawer in my desk with supplies that he can use with permission (glue, scissors, etc).

In addition to crafts, my little guy loves putting things together – doing puzzles, making pictures with foam shapes, and most especially, accessorizing Mr. and Mrs. Potato Head.

So, when my sister suggested making a real Mr. Potato Head craft as a St. Patrick’s Day activity, I knew he would love it!

Collecting Materials

This was a no cost project – other than two potatoes, which we usually have. The night before, my son and I collected things from around the craft room to use, so we would be all ready to go after breakfast the following day.

We found felt, foam, pipe cleaners, pom-poms, stickers, shamrocks, card stock, cotton balls, ribbon, and glue. However, you can really use whatever you find or have.

My son loved collecting all of things for our Mr. Potato Head craft. His special job was to put everything I handed him in the bin. He loves his special jobs 🙂

He loved putting everything together the day before because it gave him something to look forward to.

He loves getting into all of my craft supplies, so his eyes were lighting up at all of the fun things he was going to get to use.

Pictured below is the set-up. Whenever we have a messy project or a food project, I lay down a plastic table cloth, which makes for easy cleanup with a toddler.

Decorating the Mr. Potato Head Craft

Then, we just had fun and got creative. My son told us what we needed – “Mommy, first we need eyes.” And, then I asked him what he thought we should use.

We used the pipe cleaners for arms (the wire stuck right into the potato), cotton balls for the beard, pom-pom for the nose, felt for the eyes and mouth, and card stock for the shoes.

We put everything on with either Elmer’s Glue or Scotch tape. The felt on felt didn’t work too well with the glue – but everything else held up.

Making a Real Mr. Potato Head Kids Craft

For the St. Patrick’s Day hat, I simply used card stock. I cut a circle for the best, and then I rolled another piece into a cylinder. I centered the cylinder on the base and taped it on top.

We tied a ribbon around the hat – and placed an Irish sticker where the buckle would go, which made a nice touch 🙂

Then, we decided to paint the cotton orange, in an effort to make our Mr. Potato Head craft look more like a leprechaun.

It got pretty messy – and orange got all over Mr. Potato Head, but he definitely started to uphold his title as a leprechaun.

After we finished with the Mr. Potato Head craft, my little guy said, “Time for the other potato, mommy…” Just when I thought we were done 🙂

So, we made a Mrs. Potato Head. We used all of the same things, and added a felt and pom-pom bow in her hair.

Just when we were about done *again,* my son says, “Mommy, what about baby potato?”

And, I wished I had thought to get a smaller potato because that would have been cute to have a whole Mr. Potato Head family made from potatoes.

After the potatoes dried, my little guy loved playing with them.

He named Mrs. Potato Head “Nana,” which I don’t think my mom found complimentary 😉

Real Mrs. and Mr. Potato Head Craft for Kids

I did have trouble getting the potatoes to stand up straight. I had wished I cut off the bottom to make a flat surface, but I’m sure this would have shortened their shelf life.

[As a side note, I recently learned that when you leave potatoes out and exposed to light, they absorb radiation in the air (shout out to Anthony William’s amazing book “Life-Changing Foods.”) So not only will Mr. and Mrs. Potato Head be decorating our kitchen for the next 5 or so days, but they will be absorbing some of the toxins we are exposed to.]

Always a teacher, I also use our crafts as a segway to reading. During our library trip this week, we’ll be reading about St. Patrick’s Day and leprechauns, and the Mr. Potato Head craft served as pre-learning activity.

Making a Real Mr. Potato Head Craft for Kids

Overall, our Mr. Real Potato Head craft was definitely a success. My son had a ball preparing for the craft, making REAL potato heads, and playing with his new, clumsy figures.

It’s amazing to see the joy he gets from creating something he’s proud of.

3 Awesome DIYs for Truck Birthday Parties

February 20, 2017 by Eileen 20 Comments

Honk, honk. Beep, beep.

Wondering what kind of party to throw your little guy? Plan a truck birthday party!

It’s a simple theme to work with, and there are lots of easy DIY ideas that won’t break the bank or stress you out.

I recently put together a few crafty things, including a photo booth, a truck game, and themed goody bags, for my dear friend’s son’s truck party.

They were easy to make and added such a magical touch.

Pin the Wheels on the Truck

First, I love felt. I have piles and piles of it, and I love making felt boards for my son. He learned his shapes from his birthday party felt board (Abbey’s Magical Shapes). And, I love how felt sticks to felt. It makes designing activities so simple 🙂

Not only are felt boards a fun learning tool, but felt boards double as great party games, especially for toddlers.

Rather than hosting a formal game, these felt boards make great stations for kids who are developmentally at the parallel play stage.

How to Make the Felt Board

To go with the theme, I made a Pin the Wheels on the Truck felt board. The materials cost nothing – because I utilized things I had previously purchased for other parties or activities.

I used a foam board from Dollar Tree (definitely check out Dollar Tree first because these boards are way higher priced at the craft stores). Then I hot glued sheets of blue felt to the board make the background.

The felt pieces were about the size of a sheet of paper, so it took quite a few of them. Conversely, you could buy one big sheet of felt from the crafts stores – but I love using what I have 🙂

For the truck, I picked bright colors to contrast the blue background. Then, I found a clipart truck that looked like it had simple angles and cuts and then I draw it freehand on felt.

Alternatively, you could enlarge the clipart picture, print it as an 8.5×11 image, and then trace it.

If it’s too small, you could always cut it out, lay it down on the felt, and then following the lines, draw it a little big bigger than the image, using the image as your guide.

For the wheels, I traced circles using a coffee mug as a guide. And then I just made small, triangular cuts around the perimeter to make the wheels look spikey. They are by no means perfect, but they got the point across 🙂

As far as other cut-outs, I cut out a window, headlight, and thick yellow lines to give the dump truck some depth.

I hot glued everything down – except the wheels!

Last, my favorite part of any project is the creative spin. I printed a picture of the birthday boy and glued it in the window as the driver.

I also put a little label on the truck that said his name, written like it was a company truck.

My friend just LOVED the felt board. She was blown away with her son as the driver and loved how cute it turned out 🙂 The kids had a great time playing with it at the truck party.

Truck Photo Booth Prop

This prop was my favorite. It was previously a cardboard box that now serves as a truck photo booth 🙂

My friend had a huge box from getting her bathroom redone. So, I simply cut off one side of the large box. I didn’t cut off the top flap – because this served as the stand.

First I drew the truck using pretty basic shapes – rectangles with curved corners for the tires and bumper, square window, and circles for the headlights.

Then, I drew everything out with a pencil before I started painting. I also used a yard stick because I am the worst at straight lines.

For the paints, I used the below acrylic paints. I loved the colors together.

Painting Tip: Don’t make the mistake of using kids paint. Kids paint is very watered down, and you will end up doing multiple coats. I’ve done this before – and it was not efficient or fun.

I did two quick coats of paint – so you couldn’t see the cardboard anymore. Two coats also made the colors pop.

Then, I carefully cut out the window, the space between the tires, and made nicer edges around the whole truck.

It wasn’t looking much like a truck until I used a sharpie to give a nice clean outline around everything. I also painted some squiggly silver lines, which brought the tires to life.

Next, I made a steering wheel out of… you guessed it – felt! I thought it would be nice and soft for the kids to touch rather than painted cardboard. Plus, it’s way easier to cut felt than cardboard. To attach it, I used hot glue.

Last, Ash made the adorable license plate – by simply grabbing a license plate image and using Photoshop (you can use paint too) to write on it.

Not only was the cut-out a hit at the truck party, but my son LOVED watching/helping me make it. I let him do just a little painting…

He must have played with the completed truck for two hours while I cleaned the house one morning.

Even if you aren’t throwing a party, cardboard creations can provide hours of fun for toddlers 🙂

As a side note, if you are looking to take lots of pictures with the photo booth, check out the free app Ash made. It’s a photo booth app that works on laptops with a webcam 🙂

Goody Bags with Truck Cut-Outs

Goody bags are always an easy way to further incorporate the theme of your party – and these goody bags couldn’t have been easier to make!

I simply purchased yellow goody bags at AC Moore for 70 cents. (There are also some cheap craft bag options on Amazon).

Then, I made a little truck cut-out, which I included below in a free download. (You can also use cookie cutters.)

Then, my friend and I traced the truck cut-out onto blue cardstock. For the wheels, we traced the circles using a small container of paint and black paper.

After some glue, they were ready to go! They took less than 30 minutes to make – and added such a cute touch.

If you’re still wondering what kind of party to throw your little guy, don’t overlook a truck party. These simple DIYs were easy to make, cost little-to-nothing, and blew the guests away!

Not only do these ideas work for a truck birthday party, but they also work for a little blue truck party (popular for 1st birthdays), Bob the Builder parties, and construction parties.

And, in addition to the party, the felt board and photo booth prop can occupy kids for hours before or after the truck party.

You definitely don’t need to spend a lot – or dedicate too much time to create these simple truck birthday party ideas.

Making a DIY Planter Box for the Garden

February 14, 2017 by Ash 76 Comments

Tired of spending so much money for organic produce, Eileen and I decided to finally start our own garden.

Most of our backyard was filled with shade, so an elevated planter box would be ideal for positioning the garden in the most heavily sunlit area. We also wanted to use healthy, organic soil, so that was another advantage of using a DIY planter table.

Finally, we thought the raised planter box would help deter some of the wildlife from harvesting our crops. We had been plagued with groundhogs constantly eating up our sunflowers. We also have loads of deer as well as foxes running through the neighborhood – as well as a dog that jumps through the yard like a year.

Thus, we wanted a garden that none of these creatures could access.

So, a tall planter box sounded ideal for our first garden.

Planning the DIY Planter Box

I searched the internet for planter table design ideas since I hadn’t made a garden planter box before. I found a simple but sturdy design on Instructables. This particular design called for building both the DIY planter box and the stand, which made for a garden table.The planter box itself was 6 ft. x 2 ft, stood about waist height, and was made of cedar wood. The planter stand was made of regular 2 x 4s, but stained to protect from the elements. This would be perfect for us.

Except for the cedar wood, I had all the other materials required for building a planter table. Cedar wood was recommended because it is naturally very resistant to rotting.

I purchased several planks of it from Home Depot and quickly got to work in the garage building the elevated planter box.

How to Build a Raised Planter Box

Following the garden planter box plans I found online, I constructed the cedar box. The planks went together with lots of pocket holes using my Kreg Pocket hole Jig.

I recently discovered the world of pocket hole joinery, so this part of the DIY planter table was a lot of fun, and gave me a lot of valuable experience.

Here’s the garden planter box starting to come together:

You can see all the pocket holes used to join the side planks to the base of the planter box.

I joined the base with pocket holes. They are underneath so you can’t see them in the picture.

Wood clamps were a necessity for building a DIY planter box to keep the planks aligned while I fastened them.

Also, the cedar planks from Home Depot were very cheap and warped. I used clamps to straighten them (until the box shape was formed).

Here’s a picture showing one of the end corners of the garden planter box:

Note, all of the pocket holes were used.

I am also using my clamp here as a spreader to force the long end pieces apart. The cheap cedar wood so warped that I could not get the side plank in by hand. I needed the spreader for assistance.

Here’s a picture showing the nearly finished cedar garden planter box:

The pocket holes made the DIY planter box very sturdy. Also, despite all the warped cedar planks I used, the box came out very straight.

The warping was only frustrating during construction. Yet, my clamps and spreaders overcame that hurdle.

The cedar planks sold at Home Depot were not wide enough to create the ideal box depth. So, I had to extend the height of the garden planter box by a little.

It was a bit too shallow for adequate growth of roots. So using more pocket holes, I made another layer and attached it to the top of the box.

Here’s a picture of how I fastened the second layer of the raised planter box. I’m using a face clamp to keep the surfaces flush as I inserted each pocket hole screw:

How to Build the Planter Box Stand

Next up was the stand for the DIY planter box. Construction went along very easily as I followed the instructions.

The stand consisted of a cross shaped base to rest the planter box on, and 6 legs made of 2 x 4s (doubled up to provide the strength needed to hold the garden planter box when full of dirt).

I took the below picture while I was building the stand or table for the elevated planter box:

After the DIY planter stand was finished, I placed some square cedar cuts on the bottom of the legs. These served as feet for the stand up planter table.

They would help to keep the 2 x 4s off the wet ground, and to help prevent it from sinking.

Finally, I applied some stain to the whole planter table to help it’s longevity outdoors. The planter stand required a stain because I used regular 2 x 4s.

I opted not to use pressure treated wood because I didn’t want those chemicals so close to the plants. I used regular deck stain for the planter stand.

Technically, the cedar didn’t need a stain (because of its increased rot resisting abilities) but I chose to stain it anyway to get the most life out of the wood and enhance the durability of the planter stand.

It was important to use a non-toxic natural stain though.

Since we were going to use the raised planter box to grow organic produce, it was important to not use any chemicals in the garden planter box that could be absorbed by the plants. I had done my research ahead of time, and ordered one online.

Here’s a picture of the completed DIY planter box:

Notice the height extension for the box was reinforced by an outer rim. This rim also provided some visual flair.

Next I located an ideal spot for the raised planter box outside.

I decided to put the garden planter box of the way from daily backyard use, yet in a place that received the most sunlight for the amount of tree cover we have.

Unfortunately, the ground there wasn’t perfectly flat. So I dug holes in the ground for the raised planter box legs to rest.

I dug the holes at various depths so that the DIY planter box would be level once I inserted it. It was a trial and error process but didn’t take too long.

Here’s a picture showing the box stand, with the legs partially below ground to make the structure level:

And, here’s a close up of the raised planter box resting in the stand:

Here’s a picture of the raised planter box after we planted everything. We used mostly pre-grown, organic plants for a better odds since this was our first garden.

Fast forward a few months later, and our garden was thriving. We were happily surprised with the number of plants that fit in the planter table.

Tired of buying your produce from the grocery store? Trying to save money on decent organic produce? Looking to start living off the grid?

Think about building your own DIY planter box – you can definitely have a rich, plentiful garden with this box, and the raised aspect of it provides many advantages.

Our DIY planter box has stood up strong through all sorts of severe weather, and still looks the same as the day I put it outside. We had no issues with critters of any kind, and we got to use nutrient-rich organic soil. We later went on to create a DIY rain barrel to water our garden – which has helped our green goals.

In total, I spent around $50 for the cedar planks and natural stain for the planter table project.

The rest of the materials (mostly 2 x 4s, deck stain and pocket hole screws) were lying around my garage from previous projects.

Our garden certainly served us well this year, and we are looking forward to an expansion next year 🙂 This DIY planter box was just the start.

Thrifty Indoor Winter Picnic Basket

February 2, 2017 by Eileen 49 Comments

When out shopping, I can’t resist a great deal. This past holiday season, I bought quite a few things that I loved but had no need for.

Yet, when the price is right, I can’t resist.

At Michaels, I picked up the below wire basket with the burlap ribbon and the two navy snowflake mugs 70% off. Yet, the holidays came and went and I hadn’t done anything with these items.

Shortly thereafter, I thought of putting together a winter picnic basket. I love giving gift boxes and baskets – they are fun to put together and unique gifts are always so appreciated.

This indoor winter picnic basket is perfect for so many occasions – a special gift for your husband or wife, a Valentines picnic basket for couples or families, or a holiday gift for someone who has everything.

It’s even something you could save for a snowy day spent fireside.

My favorite part of this gift is the soft, fluffy blanket that I used to line the basket.

The blanket is perfect for an indoor picnic – and who couldn’t use another cozy throw?! Indoor Winter Picnic Basket - Perfect Gift Idea

I just love this wire basket – it’s rustic yet modern looking.

It came with the burlap ribbon wrapped around it, which meant no additional fussing or ribbon was needed later on 🙂

Gathering Winter Picnic Basket Items

I picked up the red snowflake plates and napkins to go with the mugs (Dollar Tree finds).

Navy and red are one of my favorite color combinations.

I put together some snacks to go in the basket. We love Mary Gone Crackers (vegan and gluten free!) as well as Lara Bars. The chocolate coconut ones taste like brownies 🙂

When picking snacks, don’t forget to think about refrigeration. If you are giving it as a gift, you probably want to stay away from things needing to be refrigerated – like cheese.

You could also include a thermos that could be used for hot chocolate or soups.

Assembling the Winter Basket

To assemble, I simply laid the blanket at the bottom of the basket, wrapping the extra around the back, and arranged the items.

The blanket worked great for the lining because it made propping up the items easy – and it served as cushion for the fragile mugs.

I had a little “help” with the arranging… our buddy Zeus. He actually wanted the crackers in the basket and was begging 🙂 He looks huge next to the basket.

As a side note, in this picture, I was attempting to use tissue paper at the bottom of the basket, but the drab tissue took the elegant basket down a few notches. That’s when I decided to make the blanket work.

The basket took minutes to put together, and the total cost was around $30. The basket, mugs, plates, and napkins were $8 – you can’t beat that!

The snacks and blanket brought it up to $30, but the blanket was on sale too 🙂

The winter picnic basket is not only a unique, creative gift but it’s something friends and family will find so thoughtful. You can put a romantic spin on it for husbands, wives, boyfriends, or girlfriends, too 🙂 Especially with Valentine’s Day coming up 🙂

And, I have to say buying things you love at the right price definitely results in some creative, cute gift ideas 🙂

Skip links

Main navigation